SAE AMS5707 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0T

上一篇: SAE ARP1179 Aircraft Gas Turbine Engine Exhaust Smoke Measurement (STABILIZED Jul 2011)
下一篇: SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By

Product Code:SAE MA1518
Title:Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters For
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope: To fully define the following requirements for bolts with spline and hexagon heads of strength class up to but no including 1250 MPa: a. Head dimensions; b. Shank dimensions; c. Geometric control; d. Surface texture.This document is based on one class of thread after all processing, including coating or plating, has been completed as follows: tolerance class 4h6h.For particulars of thread, see AS1370. For thread runout and lead threads, see AS3062.To fully define the following requirements for nuts with spline, plain hexagon and castellated configurations of strength class up to and including 1100 MPa:a. Nut dimensions; b. Geometric control; c. Surface textureFor particulars of threads, see AS1370.This document is based on the following classes of internal threads after all processing, including coating or plating, has been completed:Tolerance class 4H6H for sizes up to and including 5 mmTolerance class 4H5H for size 6 mm and largerFor particulars of thread, see AS1370.

标准名称：	汽车盘式制动器摩擦块试验后表面和材料缺陷的评价
中标分类：	车辆 >> 汽车底盘与车身 >> 制动系统
发布日期：	1900-01-01
实施日期：	1900-01-01
首发日期：	1900-01-01
作废日期：	1900-01-01
提出单位：	国家机械工业局
归口单位：	全国汽车标准化技术委员会
起草单位：	杭州汽车摩擦材料研究所
起草人：	江世履
出版日期：	1900-01-01
页数：	4页

本标准规定了汽车盘式制动器摩擦块（以下简称摩擦块）经受整车试验或实验室试验后，其表面和材料的缺陷分类、测量工具、测量方法和测量结果的评价方法。
本标准适用于摩擦块。

没有内容

没有内容

没有内容